| General Purpose Orthophthalic Laminating Resins |
|
|
|
| H520-CKW-18 |
Lloyd's approved orthophthalic, medium viscosity resin with fast cure / low exotherm in thick laminate over 5mm. |
|
|
|
H520-NE Series
|
Lloyd's approved orthophthalic, medium viscosity resin with fast cure / low exotherm. NEB-14 White, NED-14 Grey and NEG-14 Non pigmented. |
|
|
|
| C559-MEC-11 |
Filled GP Resin |
|
|
|
| DCPD Laminating Resins |
|
|
|
| H834-CEA-10 |
Medium viscosity, fast wetout resin for both thin and thick laminates 3-8mm |
|
|
|
| H834-CEA-13 |
White version of above |
|
|
|
| Marine Laminating Resins |
|
|
|
| HO34-ADX-30 |
Lloyds approved, new Improved Vinylester/DCPD blend marine skincoat. Low shrinkage / good cosmetics and improved blister performance compared with isophthalic resins. (Should be used with M601 powder bound glass) This product is also suitable for mould construction where increased toughness is required. |
|
|
|
| H834-RAA-30 |
Lloyds Approved, low velocity, good wetout DCPD resin. Fast cure in thick laminates. Premium marine resin which, in combination with HO34 ADX-30 gives excellent surface profile. Also suitable for mould construction. |
|
|
|
| H520-NEA-14 |
Lloyds approved orthophthalic, medium viscosity low styrene resin with fast cure / low exotherm for both thin and thick laminates up to 8mm. |
|
|
|
| H520-CKW-18 |
Lloyd's approved, orthophthalic, medium viscosity resin with fast cure in thick laminates over 5mm. |
|
|
|
| RTM Resin injection and infusion |
|
|
|
| R834-ACE-14 |
DCPD-Ortho blend resin, slightly thixotropic, low styrene content and low shrinkage.
Fast barcol progression with acetylacetone peroxide. |
|
|
|
| R834-IPE-12 |
DCPD resin for RTM and infusion. Can accept up to 40phr filler. Fast cure and good surface cosmetics. |
|
|
|
R706-APD-30
R737-APD-30 |
Isophthalic Promoted, non thix otropic polyester resin for use in RTM infusion.
|
|
|
|
| Fire Retardant Resins |
|
|
|
| K920-APT-30 |
Clear Class 2 Unfilled. |
|
|
|
| K920-BPS-30 |
Class 2 Filled
|
|
|
|
| Corrosion Resins |
|
|
|
| F010-TBN-23 |
Bisphenol A Vinylester for corrosion applications. This product is also suitable for mould construction. |
|
|
|
| F086-AAA-00 |
Novolac Vinylester. Outstanding mechanical properties with better corrosion resistance at higher tempratures than Bisphenols. |
|
|
|
| F706-PTA-18 |
Lloyds approved, isophthalic, thixotropic, medium viscosity, flexible skincoat resin. Fast cure in laminates |
|
|
|
| F736-PTA-18 |
<5mm. Should be used with M601 powder bound glass for best osmosis resistance in boat hulls.
This product is also suitable for mould construction. |
|
|
|
| Sewer Pipe Relining Resins |
|
|
|
| L705-NDA-06 |
Non accelerated isophthalic resin. |
|
|
|
| L705-FDA-06 |
Filled, non accelerated isophthalic resin. |
|
|
|
| Acrylic Bonding Filled Bath Resins |
|
|
|
| C520-HHA-06 |
Unfilled orthophthalic resin suitable for spray applications. |
|
|
|
| C947-VEA-11 |
50% filled formulation - cream in colour. Fast cure / low exotherm in thick laminates > 5 mm. |
|
|
|
| C550-FEF-08 |
50% filled formulation - cream in colour. Fast cure / low exotherm in thick laminates > 5 mm. |
|
|
|
| ABS Bonding Resin |
|
|
|
| C515-PEA-15 |
Low viscosity resin suitable for use filled or clear. |
|
|
|
| A867-CMU-09 |
ABS Bonding Casting Resin |
|
|
|
| Casting Resins |
|
|
|
| A830-PKH-09 |
DCPD polymer concrete resin with fast cure and low shrinkage. Suitable for high filler loadings.
|
|
|
|
| Flexible Resin |
|
|
|
| A556-FKB |
An unpromoted, adipic modified flexible base resin. |
|
|
|
| Non Standard Resin |
|
|
|
| Z999-ZKA-10 |
NSR (non standard resin) |
|
|
|
| Gel Coats |
|
|
|
| G290-AB |
Lloyds & WRC approved, clear isophthalic brush gelcoat with excellent handling characteristics |
|
|
|
| G290-AA-11000 |
White version of above |
|
|
|
| G220-AA |
WRC approved unpigmented isophthalic, spray gelcoat, with excellent handling characteristics |
|
|
|
| G220-AB-10000 |
WRC approved white isophthalic, spray gelcoat with excellent handling charateristics |
|
|
|
| G402MC |
Clear Iso/NPG spray gelcoat with excellent handling characteristics. Designed for cultured marble and onyx applications. Very low colour and excellent water and stain resistance. Needs to be applied at 25 C and above to ensure good cure. |
|
|
|
Gel Coat Rapid Colour Matching Service Available |
|
|
|
