| |
A step-by-step system for surfacing wood, MDF, foam and composite plugs and patterns using air-cure chemistry.
Usage
Used in place of gel-coat based systems, the Duratec Polyester Plug & Pattern Surfacing System saves time and labour cost. It is comprised of these fine Duratec products: |
Duratec Polyester Sealer 800A-Clear
Duratec Polyester Base Primer 707-051 Lt. Gray
Duratec Polyester EZ Sanding Primer 707-060 Lt. Gray
Duratec Polyester Hi-Gloss Coatings 904-040
Clear, 602-02 Blk |
|
| |
| * |
Duratec Polyester Sealer
Duratec Polyester SealerA low viscosity, rapid curing, penetrating sealer. Allows primers and topcoats to bond to a variety of substrates. Easy to apply. Cures rapidly and penetrates deeply. |
| |
|
| * |
Duratec Polyester Base Primer
A low porosity, high-building, fairing and shaping primer. Easy to apply. Builds quickly---between 1 to 3 mm, 40-120 mils, maximum wet-on-wet application with minimum sag on vertical surfaces. Quickly shaped by knife, file or sandpaper. |
| |
|
| * |
Duratec PolyesterE-Z Sanding Primer
Represents the new generation of sanding and surfacing primers. Low porosity and outstanding surfacing and leveling properties are generated for plug and pattern surfaces. Sanding and polishing times are reduced by 50 percent versus other primers. An exceptional primer that polishes to a high gloss, when needed. |
| |
|
| * |
Duratec Polyester Hi-Gloss Additive
For blending with Duratec Polyester Surfacing or EZ Sanding Primers when higher gloss is desired. Low viscosity results in a smooth enamel-like finish that is easily sanded.
|
| |
|
| * |
Duratec Polyester Hi-Gloss Coatings
Applied after sanding the primer when the highest gloss possible is desired. Clear or pigmented, Duratec Polyester Hi-Gloss Coatings build quickly and spray easily. Coatings generate hard, porosity free and glossy finishes. |
|
|
